News

Software

PancakeSlicer makes experimental non-planar paths easier to try

Open-source PancakeSlicer adds curved-layer options to a workflow built on OrcaSlicer. Such paths can smooth some upper surfaces, but printhead clearance limits the geometry. Its developers explicitly label non-planar printing experimental and advise reviewing G-code and supervising prints because collisions can damage hardware.

HackadayNov 15, 2026Relevance: 93/100
Multicolor

InfiMech opens MX toolchanger crowdfunding with six- and eight-head models

The MX and MX Pro entered Kickstarter on November 10. The open MX uses six dedicated heads; the enclosed MX Pro uses eight and targets engineering filaments. Induction-heated nozzles and lower purge waste are manufacturer claims, not independently verified performance. This is an active crowdfunding campaign; backing it does not guarantee delivery.

3DnativesNov 12, 2026Relevance: 92/100
3D printers

Creality introduces enclosed mBox FFF printer for children

Creality introduced the mBox with a 153 × 153 × 153 mm build volume, enclosed frame, door alert, automatic leveling and screen-based printing. Its product page recommends specific PLA materials and says the printer has no heated bed or CFS compatibility. The design is aimed at children, but adult oversight and hot-nozzle precautions remain necessary.

3D Printing IndustryNov 12, 2026Relevance: 84/100
Scanners

SHINING 3D introduces mobile EINSTAR EZ GO scanner

The EINSTAR EZ GO combines laser and infrared scanning in a mobile unit with a battery grip and software for scan-to-model workflows. SHINING 3D positions it for makers and small studios, including reverse engineering before FDM printing. Ease of use and scanning performance are manufacturer claims until independently tested.

3D Printing IndustryNov 12, 2026Relevance: 83/100
Materials

Prusa adds carbon-filled PETG ESD for electronics fixtures

Prusament PETG ESD combines carbon nanotubes for static dissipation with carbon-fiber reinforcement. Prusa positions the filament for fixtures and enclosures around sensitive electronics. Electrical properties should be checked against the product data and the intended application; the material is not a blanket guarantee of ESD safety.

Tom's HardwareNov 11, 2026Relevance: 88/100
3D printers

Raise3D unveils T450 and T700 large-format FFF printers

Raise3D announced the T450 and T700 with build volumes of 450 × 350 × 400 mm and 700 × 500 × 1,000 mm. Both use the company’s TwinFlow two-filament, single-nozzle system and actively heated chambers. The stated starting prices are US$4,999/€4,999 and US$15,999/€15,999 respectively; prices and configurations depend on region. Speed figures remain manufacturer claims.

3DnativesNov 10, 2026Relevance: 90/100
Multicolor

AXILOOP MC8 brings eight toolheads to a desktop crowdfunding launch

AXILOOP presented the MC8 and MC8 Pro as 300 mm-cube FDM machines with eight independent toolheads. Its Kickstarter campaign opened later in the week. The claimed four-second tool swap and projected shipment are manufacturer targets, not established test results or delivery guarantees.

3D Printing IndustryNov 9, 2026Relevance: 88/100
ScannersIndependent test

Elegoo M1 Ultra scanner test highlights useful scans and demanding workflow

Tom’s Hardware tested Elegoo’s M1 Ultra scanner and produced printable models after combining multiple scans and mesh cleanup. The reviewer liked calibration and battery life, but said the device needs a capable computer and often several passes; it is not a standalone scanner. Elegoo lists an early US price of US$1,599 through November 12, with regional pricing and delivery terms varying.

Tom's HardwareNov 6, 2026Relevance: 87/100
SoftwareIndependent test

Independent Meshy Edit test finds helpful local changes and failed repairs

In 36 edits across 11 models, 3Dnatives found Meshy Edit often preserved most geometry when swapping small accessories, but removals and larger changes could fail or distort parts. Some results passed the software’s printability check despite visible geometry problems. The test adds measured evidence to the October feature announcement and underlines the need to inspect a model before slicing.

3DnativesNov 3, 2026Relevance: 84/100
Multicolor

Bambu Lab launches nine-tool H3C with integrated filament management

Bambu Lab has released the H3C with nine dedicated PrintTools and the AMS 3H filament system. Its US launch price is US$2,499 before tax; regional prices and configurations differ. The company claims six-second material changes under its test conditions, but that figure is not an independent performance guarantee. The November 3 reveal confirms details that were only teased in October.

3D Printing IndustryNov 3, 2026Relevance: 95/100
→